B & H
B&H Brake Hoses is a division of Allegri Cesare, an Italian institution that has been in the fluid transport business for over 50 years. Allegri Cesari make brake hoses and fluid lines for several European automotive manufacturers and many motorcycle manufacturers now fit B&H products as standard. For the aftermarket sector, they produce stainless steel braided brake lines and high quality fittings in both reusable series for competition purposes and the B.H. Global System of pre-crimped hoses in accordance with New Zealand WOF regulations for road use.
B & H Standard - Banjo bolt
from
$8.00
B & H Standard - Banjo bolt
$8.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Grommet 20 x 10 - rubber
$2.99
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Global System Hose - stainless steel
from
$2.00
B & H Global System Hose - stainless steel
$59.00
Italian-made stainless steel, braided, hydraulic brake hoses with clear protective sheaf and female threaded socket permanently fitted on each end. The Global System fittings screw directly onto hoses. These hoses 100% comply with Waka Kotahi NZ Transport Agency regulations for Warrant Of...
B & H Global System - Straight fitting
from
$10.00
B & H Global System - Straight fitting
$13.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide or for more detail on WOF certification.
Clarification of W.O.F requirements
B & H Compliance Certificate
B & H Hose and Fittings Guide
B & H Standard - Rubber 9 x 20
$0.80
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Hose and Fittings Guide
B & H Global System Hose
from
$0.00
B & H Global System Hose
$59.00
Italian-made stainless steel, braided, hydraulic brake hoses with clear protective sheaf and female threaded socket permanently fitted on each end. The Global System fittings screw direclty onto hoses. These hoses are 100% complying to New Zealand Land Transport regulations for Warrant Of...
B & H Global System Brake Hose & Fittings
from
$7.50
B & H Global System Brake Hose & Fittings
$95.00
Italian-made stainless steel, braided, hydraulic brake hoses with clear protective sheath and female threaded socket fitted permanently on each end. There is a shortened range of banjos and fittings that screw directly onto hoses, however the full B&H range of fittings can...
B & H Global System - Banjo
from
$8.00
B & H Global System - Banjo
$14.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide or for more detail on WOF certification.
B & H Standard - olive
$3.00
B & H Standard - olive
$3.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Global System - Swivel Male
from
$15.00
B & H Global System - Swivel Male
$20.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide or for more detail on WOF certification.
B & H Standard - Banjo
from
$13.50
B & H Standard - Banjo
$13.50
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Global System - Swivel Female
from
$11.00
B & H Global System - Swivel Female
$25.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide or for more detail on WOF certification.
B & H Global System - Hose to Hose Connector
$7.50
Made in Italy. See the Downloads section below for the Hose & Fittings Guide or for more detail on WOF certification.
B & H Global System - Fiixed Male concave seat
from
$12.00
B & H Global System - Fiixed Male concave seat
$12.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide or for more detail on WOF certification.
B & H Standard - Banjo bolt - double
from
$9.00
B & H Standard - Banjo bolt - double
$9.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Global System - Side Banjo
from
$8.00
B & H Global System - Side Banjo
$8.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide or for more detail on WOF certification.
B & H Standard - Hose cover 74.5 mm - rubber
$2.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Bulkhead fixed male concave seat
$19.50
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Global System - Short Banjo
from
$10.00
B & H Global System - Short Banjo
$12.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide or for more detail on WOF certification.
B & H Standard - Banjo bolt - for bleed - milled
from
$21.00
B & H Standard - Banjo bolt - for bleed - milled
$36.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Swivel female JIL thread
from
$20.00
B & H Standard - Swivel female JIL thread
$20.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Swivel female BSP thread
$15.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Sleeve 86 mm - rubber
$4.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Sleeve 37 x 12 - rubber
$1.67
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Reservoir fluid hose
from
$0.99
B & H Standard - Reservoir fluid hose
$45.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Nut for bulkhead
$9.50
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - nut
from
$5.00
B & H Standard - nut
$5.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Male/male adaptor
from
$4.50
B & H Standard - Male/male adaptor
$4.50
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Male/female adaptor
from
$8.00
B & H Standard - Male/female adaptor
$8.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Male/female adaptor (3/8")
$14.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Male bulkhead
$25.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Male adaptor
from
$5.00
B & H Standard - Male adaptor
$11.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Hose junction 90 deg.
$75.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Hose clamp
$5.00
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.
B & H Standard - Grommet 21 mm - rubber
$1.35
Made in Italy. See the Downloads section below for the Hose & Fittings Guide.