Ram Mounts
Introduced in 1990 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phones, tablets, cameras, GPS systems, laptops, marine electronics, printers, radios, and much more.
As the most innovative product line of its kind, RAM® Mounts offers approximately 5,000 modular components. Built on the interchangeable ball and socket system and designed around an elastomeric rubber ball, these components incorporate non-slip functionality as well as shock and vibration damping. The unique design of the patent-protected RAM® Mounts system provides quick installation, adjustability, and durability – all at a low cost.
Backed by more than 400 employees, RAM® Mounts is proudly located in Seattle, Washington in the same neighborhood where the company was started. Utilizing the finest assembly hardware, durable composites, stainless steel, rubber, and aluminum, RAM® mounting solutions have been synonymous with quality and performance for more than two decades. No matter where life takes you, depend on RAM®.
RAM LARGE GAS TANK BALL BASE FOR MOTORCYCLES
$84.90
The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of...
RAM COMPOSITE DOUBLE SOCKET SWIVEL & RATCHET ARM
$54.90
The RAP-B-200-2U consists of double 1" B size diameter open sockets with a 360-degree center rotation point and a connecting 180-degree swivel joint. The central pivot point provides unsurpassed adjustability for 1" B size ball bases, device holders, and adapters that are...
RAM TOUGH-STRAP HANDLEBAR BALL BASE
$38.90
The RAM® Tough-Strap™ is lowest profile rugged mounting solution for any bike or motorcycle handlebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike or e-bike with a simple twist of a knob. This RAM®...
RAM MOTORCYCLE BRAKE/CLUTCH RESERVOIR MOUNT FOR GARMIN ZUMO
$99.90
The RAM combination handlebar and brake/clutch reservoir mount provides the ultimate flexibility for mounting to your motorcycle. Mount to either your handlebar or brake/clutch, almost infinite adjustment and perfect viewing angles are provided in this kit. RAM’s patented design also dampens shock...
RAM X-GRIP PHONE MOUNT W/ M/C BRAKE/CLUTCH RESERVOIR BASE
$154.90
The RAM-B-174-UN7U consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, a double socket arm, and a universal X-Grip® cell phone cradle. Designed into the mount is a 1" diameter patented rubber ball...
RAM QUICK-GRIP HOLDER W/ BALL FOR APPLE MAGSAFE PHONES
$99.90
The RAM® Quick-Grip™ product line gets an Apple MagSafe Charger compatible insert. Designed specifically to fit the official Apple MagSafe Charger, this RAM® Quick-Grip™ phone holder has a removable backing plate so you can install your Apple MagSafe Charger directly into the...
RAM TWIST AND TILT MOTORCYCLE MIRROR BALL BASE
$59.90
RAM offers a wide variety of motorcycle mounts. A great new addition to this already extensive product line is our new Twist and Tilt™ base. Made of die cast marine grade aluminum, durability won’t be a concern. The patented rubber ball dampens...
RAM Tough-Ball Mirror Base For Harley-Davidson Motorcycles
$39.90
The RAP-B-379-HA1U consists of a 1/4"-20 X 1" thread, connected to a 1" diameter ball, female blind barrel nut and nylon washer.Specifications:BALL SIZE: B Size (1", 25.4mm)Hardware Included:
x1 1/4"-20 x .87" Barrel Nut
x1 0.77" Nylon Washer
RAM SMALL GAS TANK BALL BASE FOR MOTORCYCLES
$79.90
The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of...
RAM H/BAR U-BOLT DOUBLE BALL MOUNT W/ ACTION CAMERA ADAPTER
$94.90
The RAM-B-149Z-A-GOP1 consists of a zinc coated u-bolt base, SHORT size double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points...
RAM KEY LOCK KNOB WITH BRASS INSERT FOR B SIZE SOCKET ARMS
$59.90
The RAM locking knob, includes a brass 1/4"-20 thread, for 1" (B size) socket arms; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place...
RAM PIN-LOCK SECURITY KNOB FOR B SIZE SOCKET ARMS
$18.90
The RAP-S-KNOB3U consists of a 1/4"-20 female threaded security knob and key knob. The RAP-S-KNOB3U replaces all knobs on 1" diameter B size arms and mounts. The RAP-S-KNOB3U offers the ideal amount of leverage to properly tighten your mount to prevent slippage...
RAM CENTERED RESERVOIR COVER BALL BASE
$48.90
The RAM-B-345 brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball centered. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware...
RAM DOUBLE BALL ADAPTER
$38.90
RAM DOUBLE BALL ADAPTER
$38.90
The RAM-B-230, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball center the arm length is 1.75". This mount is ideal if your...
RAM ADD-A-BALL ACCESSORY BALL FOR B SIZE SOCKET ARMS
$23.90
Connect another device to your existing RAM® Mount with the RAM-B-273U Ball Base Adapter. This ball is made up of a 1" ball connecting to a 1/4"-20 threaded stud with a length of 1.6". The threads on this ball replace the bolt...
RAM DOUBLE SOCKET ARM - MEDIUM
$39.90
The RAM-B-201U consists of a medium double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 3.73", this is the standard RAM® double socket arm size. The easy to adjust knob allows for near-...
RAM TORQUE SMALL RAIL BASE
$54.90
RAM TORQUE SMALL RAIL BASE
$54.90
The RAM® Torque™ small rail base features a B size 1” rubber ball and accommodates rails from 3/8” to 5/8” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to...
RAM LEVEL CUP 16OZ DRINK HOLDER WITH RAM TOUGH-CLAW MOUNT
$84.90
The RAM-B-132-400U consists of the small Tough-Claw™ base and RAM Level Cup™ Self-Leveling Drink Holder. The drink cup holder has two pivot points, allowing for your drink to always stay upright and never spill. Koozie is included with purchase of the RAM-B-132-400U....
RAM X-GRIP PHONE HOLDER WITH MOTORCYCLE FORK STEM BASE
$144.90
Designed to fit into the cylindrical bore wall of fork stems that measure 12mm to 38mm (.5” to 1.49”) in diameter, the RAM-B-176-A-UN7U consists of a fork stem base, short length double socket arm, and the popular spring-loaded RAM® X-Grip® phone holder....
RAM TOUGH-BALL WITH 1/4"-20 X .25" THREADED STUD
$19.90
The RAP-B-379U-252025 consists of a 1" diameter rubber ball connected to a 1/4"-20 x .25" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of these devices.Features: RAM® Tough-Ball™ features a 1/4"-20 x...
RAM COMPOSITE DOUBLE SOCKET ARM - MEDIUM
$25.90
The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for...
RAM DOUBLE SOCKET ARM - LONG
$59.90
RAM DOUBLE SOCKET ARM - LONG
$59.90
The RAM-B-201U-C consists of a long double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 6", this is the longest B size RAM® double socket arm size and adds more reach to your...
RAM GOPRO BASE ADAPTER W/ 1" BALL
$26.90
For anyone who needs more versatility from their GoPro® mounting solution, look no further than the RAM Adapter for GoPro Bases. Utilizing the RAM ball and socket mounting system, simply attach the included B Size 1” ball to the base for enhanced...
RAM X-GRIP PHONE MOUNT WITH RAM SNAP-LINK TOUGH-CLAW
$139.90
The RAM-HOL-UN7-400U consists of the small Tough- Claw™ base and universal X-Grip® cradle. The X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your smart- phone behind foam pads and plastic. The X-Grip® cradle...
RAM ACTION CAMERA UNIVERSAL BALL ADAPTER
$28.90
For anyone who needs more versatility from their GoPro® mounting solution, look no further than the RAM® ball adapter for GoPro® mounting bases. Utilizing the RAM® ball and socket mounting system, simply attach the included B size 1” rubber ball adapter to...
RAM MOTORCYCLE HANDLEBAR CLAMP BASE WITH M8 BOLTS
$26.90
For M8 handlebar bolts, the RAM-B-367U motorcycle handlebar base will replace the existing bolt with a 1" B size ball. This rubber ball base provides shock and vibration damping, and is compatible with a wide variety of B size RAM® double socket...
RAM X-GRIP LARGE PHONE MOUNT WITH RAM SNAP-LINK TOUGH-CLAW
$144.90
The RAM® Tough-Claw™ is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The small version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from .625" to 1.14" in outer diameter...
RAM QUICK-GRIP XL PHONE MOUNT WITH HANDLEBAR U-BOLT BASE
$159.90
This version of the spring-loaded RAM® Quick-Grip™ holder provides a secure fit for a variety of large phones and other devices. The adjustable side keepers ensure that devices like GPS units and Bluetooth speakers within the listed compatible dimensions will also fit...
RAM X-GRIP UNIVERSAL PHONE HOLDER WITH BALL
$74.90
The popular spring-loaded RAM® X- Grip® phone holder features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of high-strength composite and stainless steel, the RAM® X-Grip® phone...
RAM MOTORCYCLE BRAKE/CLUTCH RESERVOIR & HANDLEBAR BALL BASE
$49.90
The RAM-B-309-7U combination handlebar and brake/clutch reservoir base provides the ultimate flexibility for mounting to your motorcycle. Attach the base to either your handlebar or brake/clutch, and achieve near-infinite adjustability and ideal viewing angles for your phone, GPS unit, or action camera....
New
RAM HOLDER FOR APPLE IPAD MINI
$38.90
Give your device the home it deserves. Features: Form-fit cradle for iPad mini, iPad mini 2, and iPad mini 3 provides a perfect fit for your device without a case. Compatible with B and C size RAM® round ball bases for attaching...
New
RAM TOUGH-CLAW SMALL CLAMP BASE WITH BALL
$84.90
NB: This item comes in retail display packaging.The RAM® Tough-Claw™ is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The small version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging...
New
RAM TORQUE LARGE RAIL BASE (Retail Packaging)
$59.90
NB: This item comes in retail display packaging.The large version of the RAM® Torque™ handlebar mounting base features a 1" B size RAM® rubber ball and is compatible with rails 1 1/8” to 1 1/2" in diameter. Sizing inserts are included to...
New
RAM TORQUE MEDIUM RAIL BASE (Retail Packaging)
$59.90
NB: This item comes in retail display packaging.The RAM® Torque™ handlebar mounting base features a 1" B size RAM® rubber ball and is compatible with rails 3/4” to 1” in diameter. Sizing inserts are included to provide a tight fit while also...
New
RAM TORQUE SMALL RAIL BASE (Retail Packaging)
$59.90
NB: This item comes in retail display packaging.The RAM® Torque™ small rail base features a B size 1” rubber ball and accommodates rails from 3/8” to 5/8” in diameter. Sizing inserts are included to provide a snug fit and protection of the...
New
RAM MOTORCYCLE HANDLEBAR CLAMP BASE WITH M8 BOLTS (Retail Packaging)
$31.90
NB: This item comes in retail display packaging.For M8 handlebar bolts, the RAM-B-367U motorcycle handlebar base will replace the existing bolt with a 1" B size ball. This rubber ball base provides shock and vibration damping, and is compatible with a wide...